The Most Advanced Water Purification System Available!
We begin with a Cold Cathode Corona Discharge Ozone Generator that is certified to produce 0.5 g/hr of ozone at a high concentration flow rate of 1.25 - 2 l/min. To ensure we have as much of the ozone mixed into solution as possible, we force it through a patented Mazzei Injector. This pushes the ozone into a vacuum where the molecules are shattered into fragments smaller then water particles. Approximately 80 percent of the ozone will be mixed into solution as a result of this process. Next, the ozone is kept in solution for a minimum contact time of 18 seconds to allow it to oxidize organic contaminants from impure spa water. This is done by forcing the water through our Static Mixing Chamber. This special chamber utilizes the latest in mixing technology within the Tri-Pac Reaction Zone. The goal here is to increase contact time by slowing down the water flow, further mixing the ozone and facilitating a reaction. A small percentage of ozone gas will remain out of solution and we need to isolate and neutralize. The Peak's Off-Gas Chamber accomplishes this by allowing undissolved ozone to rise naturally to the top of this chamber, where it is pulled through the Off-Gas Destruction Filter. This catalytic filter converts the ozone back to pure oxygen. The science behind the Peak Ozone System may seem complex, but the results are amazing and the maintenance for you, the spa owner, is virtually non-existent. For Peak performance in water maintenance, choose the Peak Ozone System, available only with Arctic Spas.